DE DIETRICH DHD1192X - Manual (Page 11)

11
CONTROL PANEL DESCRIPTION
• On/Off
3 3 / USING YOUR APPLIANCE EN
Pressing the button starts the hood in speed 1 (the button is illuminated).
A long press on the button turns the hood off.
Once the hood has started, you can modify the suction speed by pressing for
speed 2 ( is lit) or for speed 3 ( is lit).
The function allows your hood to remain at maximum speed 4 for 10 minutes,
before switching back to speed 2.
• Change speed
• Configure recycling mode (or evacuation mode as an optional extra)
A long press (more than 2 sec) on the and buttons allows you to select
Evacuation or Recycle mode. The and buttons are lit and the or button
flashes.
A short press on selects recycle mode (the button flashes and the button is
off).
A short press on selects evacuation mode (the button flashes and the
button is off.
A short press on confirms the configuration (or automatic set after 10 sec).
The hood’s default mode is evacuation.
•
Cartridge filter saturated
The button flashes (1 short flash) for 2 minutes after the hood stops to signal that the
cartridge filters must be cleaned (see section “Cleaning the cartridge filter”).
Give a long press (more than 2 sec) on to unlock the “saturation” function.
• Carbon filter saturated
The button flashes (2 short flashes) for 2 minutes after the hood stops to signal that
the carbon filters must be cleaned (see section “Changing the carbon filter”).
Give a long press (more than 2 sec) on to unlock the “saturation” function.