DE DIETRICH DHD1192X - Manual (Page 8)

8
2 2 / INSTALLING YOUR APPLIANCE EN
Note
This appliance is delivered with a H 05 VVF power cord that has three 0.75-mm 2 con-
ductors (neutral, phase and ground). It must be connected to the 220-240V single phase mains
supply via an IEC 60083 standard socket which must remain accessible after installation or by
incorporating a switch in the fixed wiring, as required by installation regulations.
We cannot be held responsible for any accident resulting from an non-existent, defective or
incorrect ground lead. The fuse in your set-up must be 10 or 16 amperes. If the power cable
is damaged, call the after-sales service department in order to avoid danger.
Note
If the electrical installation in your residence requires any changes in order to hook up
your appliance, call upon a professional electrician.
Note
If the hood displays any malfunctions, unplug the appliance or remove the fuse corre-
sponding to the electrical socket where your appliance is plugged in.
• ELECTRICAL CONNECTION
During installation and maintenance operations, the appliance must be unplugged from the
electrical grid; fuses must be cut off or removed.
Electrical connections must be carried out after assembly and fixing.
Ensure that:
- the electrical installation has sufficient voltage,
- the electrical wires are in good condition
- the diameter of the wires complies with the installation requirements.