Eclipse - Fujitsu Ten CD1000 - Manual (Page 9)

- 9 -
Installing the main unit Installing the main unit
Español
Français
Italiano
Nederlands
Svenska
English
30˚ or less
Level (reference)
Front
- Installation angle -
To maintain proper function, the main unit must be
mounted less than 30 degrees. If the angle is in
excess of 30 degrees, CD skipping and improper
CD ejection may occur.
Tip
Remove the bezel. 1
When it is not required to detach the front control
panel from the main unit, use the provided screw
to attach the control panel to the main unit.
Tip
- Installation preparation -
Mounting sleeve 3
Bezel 5
2 Insert the audio unit removal tool on the left and
right side of the main unit, and disengage the lock
of the mounting sleeve.
Be careful not to damage the fuse that is installed
on the back side of the main unit when removing
the mounting sleeve from the main unit.
Tip
Main unit 1 3 Remove the mounting sleeve from the main unit.
Main unit 1
Mounting sleeve 3
Mounting sleeve 3
Mounting sleeve 3
Screw 13
15A fuse
Detachable panel