Epson WorkForce C362B - Manual (Page 28)

28 Faxing a Document
Sending a Fax From the Control Panel
You can send a fax by manually entering a fax number, as described below.
Note:
In Windows, you can send a fax from your computer using the Epson FAX Utility, see
page 29 for details.
1. Place your original(s) for faxing (see page 17).
2. Press the K
Fax
button.
3. Use the numeric keypad to manually enter the fax
number. You can enter up to 64 digits.
Note:
To dial the number using your telephone, by redialing, or by selecting from your
speed dial list, see page 29.
4. To change the resolution, contrast, or transmission settings, press x Menu
and select settings as necessary.
5. Press the x B&W or x Color button to send your fax.
Note:
If the recipient’s fax machine prints only in black and white, your fax is
automatically sent in black and white even if you select color.
■ If you are scanning with the Automatic Document Feeder, your
document is automatically scanned and faxed.
■ If you placed your document on the scanner glass, you see this screen after
the first page is scanned:
If you need to fax additional pages, place your original on the scanner
glass or in the Automatic Document Feeder. Then press
1
to continue. If
you do not need to fax another page, press 2 . Your document is faxed.
■ If the fax number is busy, you see a redialing message and the WorkForce
310 Series redials after one minute. To redial immediately, press
Redial/Pause .
To cancel faxing, press y
Stop/Clear Settings
at any time.
WF310_QG.book Page 28 Wednesday, April 8, 2009 2:14 PM