Epson WorkForce C362B - Manual (Page 7)

Install Software 7
5. When you see this screen, click
Next
to start network setup.
6. Make sure that your printer is turned on and connected to your network as
described on page 5.
7. When you see the Firewall Warning screen, click Next .
Note:
If you see a firewall alert message click Unblock or Allow to let EpsonNet Setup
continue. Do not select Ask Me Later, Keep Blocking, or Block.
WF310_QG.book Page 7 Wednesday, April 8, 2009 2:14 PM