DE DIETRICH DRS635JE - Manual (Page 37)

37
Apply covers (C-D) on joint cover lugs and into hinge
holes.
Snap vent grille (B) and hinge covers (E) into
position.
PR266
Ha Hb
Hc
Hd
Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
D724
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
(I = short) (P = long)
I
P
B E
E
D
C
From the plastic cover (E), which is used to cover the
hinge with the pivot pin, you must take away the part
as indicated in the drawing.
This operation is made easer since there is, in the
internal part of the cover hinge lid a groove that
facilates the removal of this coomponent.
“Remove the part marked with DX, if the pivot pin is
inserted in the right hinge, SX in opposite case.”