Amprobe ACF-3000DM-A Current Transducer - Manual (Page 9)

B AT T E RY R E P L A C E M E N T
1) Using a coin, turn a lock from close position marked as
to open marked as
2) Open the cover of the battery compartment by lifting it.
3) Replace batteries (note the polarization marked on the bottom of the bat-
tery compartment).
4) Replace the cover of the battery compartment.
5 ) Turn a lock from open to close position
9
Fig. 6 - BACK OF ACF-3000DM-AW/ BATTERY COVER REMOVED
! ! SAFETY WARNING ! !
Before removing the battery cover, make sure that the Flexible AC
Current Transducer is removed from around any active conductor.