Amprobe ACD-6-PRO Clamp-On-Multimeters - Manual (Page 6)

5
CAUTION
Using Resistance, Continuity or Diode function in a live circuit will produce false results
and may damage the instrument. In many cases the suspected component must be
disconnected from the circuit to obtain an accurate measurement reading.
Ω Resistance, and
Continuity functions
Inputs are made through the test lead terminals. Slide-switch on defaults at Ω. Press
SELECT button momentarily to select Continuity function, which is convenient for
checking wiring connections and operation of switches. A continuous beep tone
indicates a complete circuit.