Amprobe ACDC-100 Clamp-On-Multimeters - Manual (Page 6)

5
SyMboLS
�
Battery
�
Refer to the manual
�
Double insulated
�
Dangerous Voltage
�
Direct Current
�
earth ground
�
Alternating Current
�
Audible tone
�
Conforms to relevant Australian
standards.
�
Complies with eU directives
�
Do not dispose of this product as
unsorted municipal waste.
�
Underwriters laboratories.
[note: Canadian and US.]
�
Application around and removal
from hazardous live conductors
is permitted
SAfETy INfoRMATIoN
The ACDC-100 Series Digital Clampmeters conform to en61010-1:2001; en61010- 2- •
032:2002; CAT iii 600 V, class 2 and pollution deg.2
This instrument is en61010-1 certified for installation Category iii (600V). it is
•
recommended for use in distribution level and fixed installations, as well as lesser
installations, and not for primary supply lines, overhead lines and cable systems.
Do not exceed the maximum overload limits per function (see specifications) nor the limits
•
marked on the instrument itself. never apply more than 600 Vdc/600 V ac rms between
the test lead and earth ground.
� Warnings and Precautions
Before and after hazardous voltage measurements, test the voltage function on a known •
source such as line voltage to determine proper meter functioning.
Disconnect the test leads from the test points before changing meter functions.
•
inspect the Clampmeter, test leads and accessories before every use. Do not use any •
damaged part.
never ground yourself when taking measurements. Do not touch exposed circuit elements
•
or test probe tips.
Do not operate the instrument in an explosive atmosphere.
•
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. •
The meter is intended only for indoor use. To avoid electrical shock hazard, observe the •
proper safety precautions when working with voltages above 60 VDC or 30 VAC rms.
These voltage levels pose a potential shock hazard to the user.