Amprobe PM-60 Pocket-Meter - Manual (Page 12)

6
Resistor / Capacitor / Continuity / Diode
• For better measurement accuracy of small value
capacitance, subtract the residual capacitance of
the Meter and leads from measurement.
• Under diode mode, LCD displays “bad” when
measuring a diode conducted at forward and
reverse bias.
• LCD displays capacitance mode when no
measurement at Auto-sense mode.
• Under Auto-sense mode, do not measure a
broken component, a unknown component, or a
component with mixed electrical characteristic,
such as measuring a resistor and a capacitor in
parallel. The meter may display incorrectly.