Amprobe DM9C Digital-Multimeter - Manual (Page 4)

References marked on instrument or in users manual
The users manual contains information and references, necessary for safe
operation and maintenance of the instrument. Prior to using the instrument the
user is kindly requested to thoroughly read the users manual and comply with it
in all sections. Failure to read the users manual or to comply with the warnings
and references contained herein can result in serious bodily injury or instrument
damage
Introduction
The Amprobe DM9C is a universal, multi-purpose electrical measuring instrument. It
complies with the standards DIN VDE 0411 and EN 61010, and provide safe, reliable
operation. The DM9C multimeter is a valuable tool for all sorts of measurements in both
trade and industry.
• Digital Multimeter with extra large display
• 3 3/4 LC-Display with 4000 digits
• Safety according to DIN VDE 0411, EN 61010, IEC 61010, CAT II/600 V
• Voltage-, Current- and Resistance Measurement
• Diode- and Continuity Test
• Autoranging
• Rubber holster for impact protection
After unpacking, check that the instrument is complete, and that all accessories are
present.
2
Warning of a potential danger,
comply with users manual.
Equipment protected
throughout by double
insulation or reinforced
insulation.
Caution! Dangerous voltage.
Danger of electrical shock.
Canadian Standards Association.
Conformity symbol, the
instrument complies with the
valid directives. It complies
with the EMC Directive
(89/336/EEC) and the Low
Voltage Directive (73/23/EEC)
with their valid standards.
Reference. Please use utmost
attention.
Symbol for the marking of
electrical and electronic
equipment (WEEE Directive
2002/96/EC).
2526044_Rev2_dm9c.qxd 10/26/06 9:50 AM Page 2