Emerson Liebert Xtreme Density - Manual (Page 52)

Liebert XD Cooling Modules—Liebert XDO, Liebert XDV, Liebert XDH and Liebert XDCF
46
4.8 Liebert XD Flex Pipe Kit
Flex Pipe kits are available in lengths of 4, 6, 8 and 10 feet (1.2, 1.8,2.4 and 3 meters). Connection
style to the unit end may be straight or 90 degrees. Connection to the prefab piping assembly is a
threaded coupler. For data on acquiring the correct kit for your installation, see Table 17.
Table 17 Liebert XD Flex Pipe assemblies, supply and return
Liebert XDV
Liebert XD
CoolFrame
Liebert
XDO Liebert XDH
Description
One-shot
Couplings
Removable
Couplings
One-shot
Couplings
One-shot
Couplings
One-shot
Couplings
Removable
Couplings
4ft long (1.2m), 0º 186568G4 187867G4 186568G4 2 186566G4 2 x 186566G4 2 x 187865G4
4ft long (1.2m), 90º 186567G4 187866G4 - 186565G4 2 x 186565G4 2 x 187864G4
6ft long (1.8m), 0º 186568G1 187867G1 186568G1 2 186566G1 2 x 186566G1 2 x 187865G1
6ft long (1.8m), 90º 186567G1 187866G1 - 186565G1 2 x 186565G1 2 x 187864G1
8ft long (2.5m), 0º 186568G3 187867G3 186568G3
3
186566G3 2 x 186566G3 2 x 187865G3
8ft long (2.5m), 90º 186567G3 187866G3 - 186565G3 2 x 186565G3 2 x 187864G3
10ft long (10m), 0º 186568G2 187867G2 186568G2 3 186566G2 2 x 186566G2 2 x 187865G2
10ft long (10m), 90º 186567G2 187866G2 - 186565G2 2 x 186565G2 2 x 187864G2
Min Bend Radius, Supply 1 7" (178mm) 7" (178mm)
Min Bend Radius, Return 1 8" (203mm) 9" (229mm)
1. The minimum bend radius is for the flexible portion of the Liebert XD Flex Pipe. Because a section of hard
pipe is at each end of the Liebert XD Flex Pipe, the minimum bend radius can be larger.
2. Top Module
3. Bottom Module