Amprobe SOLAR-100 Solar-Power-Meter User Manual
Page 11
Advertising
8
9
Data Hold Button
• Press the “
” button to go into hold mode, and
“
” appears on the screen to allow you to
read the data. Press this button once again to
deactivate it.
Auto Range Button
• Press the “
” power button to turn ON the
power and put the device to operating mode. If
“1999” comes up on the screen, it suggests the
device will become overloaded or has become
overloaded “OL”. In this case, press the “
”
button, and “199” or your acquired value then
comes up.
Picture 2.
Advertising