Amprobe TIC-300-PRO Non-Contact-Voltage-Detector - Manual (Page 10)

4 5
INTRODUCTION
The TIC 300 PRO is an instrument for safely checking
the presence of an AC voltage without making any
disconnection in cables, wall sockets, fuses, circuit
breakers, junction boxes, etc. No current flow is needed
for correct operation.
Rugged and reliable for utility, industrial and mine safety
applications, The TIC 300 PRO warns against dangerous
voltages in low and medium voltage applications up to
122 KV without contacting the energized conductor.
Features
• Utility tool for checking transmission lines, power
distribution equipment, down power lines, fuses,
and load break connectors
• Lower voltage setting for checking voltage
presence in breaker panels, breakers, power
outlets and wiring
• Verifies presence of Voltage from 30 VAC to
122,000 VAC (122kV)
• Non-contact AC voltage detection
• Visual and audible voltage indication
• Self-test verifies that tester works properly
• Ergonomic design with a convenient handle
• Drop-proof to 6-FT
Used with Hot Stick TIC 410A for voltage higher than
1500V