Amprobe TIC-300-PRO Non-Contact-Voltage-Detector - Manual (Page 9)

2 3
• Observe the proper safety precautions when
working with voltages above 33 VAC rms to avoid
electrical shock hazard.
• Before and after hazardous voltage measurements,
test the Tic 300 PRO by pressing the TEST button
and/or on a known source such as line voltage to
determine proper operation.
• Never ground yourself when taking measurements.
Do not touch exposed circuit elements.
• Do not operate the instrument in an explosive
atmosphere.
• Do not expose this product to rain or moisture. This
increases the risk of fire or electric shock.
• Do not rely on this tester for shielded wire.
• Do not let the unit make contact with a live line
with voltage higher than 20 kV.
• 3 phase feeder cables with conductors close to each
other may self-cancel the electric field and not be
detected by your Tic tracer. Verify that the phase
conductors are separated by at least 15” (381mm)
before testing for AC voltage.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 TIC 300 PRO
1 9V Alkaline Battery
1 Users Manual
1 Carrying Case
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.