Amprobe TR300 Temperature-Relative-Humidity-Data-Logger - Manual (Page 7)

6
Sample point:
from ‘pts’ & ‘p1’, press SeT key •
press up and Down pushbuttons to select the sample point from 1h(1000)…….16h(16000). •
The sample point will be divided in half: ½ for temperature and ½ for humidity. example:
16000 points= 8000 Temp + 8000 RH
press SeT to save and return to p1
•
press MoDe to escape without saving the value •
Start Mode:
press Up and Down keys to select from:
Repeat: ‘rep’ is displayed on the bottom of the screen. in this mode the meter will •
automatically record again once the memories are uploaded to a pC.
from ‘Stn’ & ‘p2’, press SeT key
■ ■
press Up or Down key to select ‘rep’
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape
■ ■
Press Up and Down Press SET to save