Amprobe TR300 Temperature-Relative-Humidity-Data-Logger - Manual (Page 8)

7
Key Start: ‘hey’ is displayed on the bottom of the screen. in this mode, the meter will start •
recording when you press Start/Stop for more than 2 seconds.
from ‘Stn’ & ‘p2’, press SeT key
■ ■
press Up or Down key to select ‘hey’
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape
■ ■
immediately: ‘|nn’ is displayed on the bottom of the screen. in this mode, the meter will •
start recording immediately after you save the setting.
from ‘Stn’ & ‘p2’, press SeT key
■ ■
press Up or Down key to select ‘|nn’’
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape and start recording.
■ ■
To stop the recording, press and hold Start/Stop for more than 2 seconds.
■ ■
Schedule: ‘SCh’ is displayed on the bottom of the screen. in this mode, the meter will start •
recording from the preset date and time.
from ‘Stn’ & ‘p2’, press SeT key
■ ■
press Up or Down key to select ‘SCh’’
■ ■
press SeT to save and return to p2
■ ■
press MoDe to escape
■ ■
Start Time:
press SeT to enter the setting mode •
press Up or Down key to select ‘Stt’ & ‘p3’ •
press SeT to enter edit mode for year ‘Yer’ •
press Up or Down key to adjust the year •
press SeT to enter edit mode for month ‘Mon’ •
press Up or Down key to adjust the month •
press SeT to enter edit mode for day ‘dAt’ •
press Up or Down key to adjust the day •
press SeT again to enter the edit mode foe hour’Hor’ •
press Up or Down key to adjust the hour •
press SeT again to enter the edit mode of minute’ni n’ •
press Up or Down key to adjust the minute •
press SeT again to enter the edit mode for Second ‘Sec’ •
press Up or Down key to adjust the second •
press SeT to save the date and time •
press MoDe to quit •