Amprobe AMB-35 Insulation-Tester - Manual (Page 8)

3). Press TEST key, the display should indicate approximately 0.5Ω, if the
display reads OL, replace the fuse as described next and test again.
14
13
WARRANTY
10-2 Replace the Fuse
Congratulations! Your new instrument has been quality crafted
according to quality standards and contains quality components and
workmanship. It has been inspected for proper operation of all of its
functions and tested by qualified factory technicians according to the
long-established standards of our company.
Warning
To avoid electric shock, personal injury or damage to the meter, use
only the specified fuse.
1). Set the function switch to OFF position.
Your instrument has a limited warranty against defective materials
and/or workmanship for one year from the date of purchase provided
that, in the opinion of the factory, the instrument has not been tampered
with or taken apart. 2). Disconnect test leads from any power source.
3). Place the meter face down on a nonabrasive surface and loosen the
four screws.
4). Take off the bottom cover.
Should your instrument fail due to defective materials, and/or
workmanship during this one-year period, a no charge repair or
replacement will be made to the original purchaser. Please have
your dated bill of sale, which must identify the instrument model
number and serial number and call the number listed below:
5). Remove the fuse, replace with a new fuse.
6). Place the bottom cover on and secure the four screws.
7). Test the fuse (refer 10-1 Testing the Fuse).
Repair Department
11. BATTERY REPLACEMENT
ATP – Amprobe, TIF, Promax
Miramar, FL
Phone: 954-499-5400
1). Set the function switch to OFF position.
800-327-5060 2). Disconnect test leads from any power source.
Fax: 954-499-5454
3). Place the meter face down on a nonabrasive surface and loosen the
two screws. Website: www.Amprobe.com
Please obtain an RMA number before returning product for repair. 4). Take off the battery cover.
Outside the U.S.A. the local representative will assist you. Above
limited warranty covers repair and replacement of instrument only and
no other obligation is stated or implied. 5). Remove the battery, replace with six new batteries.
6). Place the battery cover on and secure the two screws.
12. MAINTENANCE & CLEANING
Maintenance & Clearing :
1). Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
Miramar, FL
Phone: 954-499-5400
2). Periodically wipe the case with a dry cloth.
Do not use abrasives or solvents on this instrument. Fax: 954-499-5454