Amprobe VPC-20 Voltage-Continuity-Tester User Manual
Page 2
Replacing the Batteries
If the sign “BAT” appears on the LCD display, it indicates that the batteries should be
replaced. Remove screws on the back cover and open the case. Replace the exhaust-
ed batteries with new batteries. (AA(2);NEDA 15F or IEC R6)
WARRANTY
Congratulations! Your new instrument has been quality crafted according to quality
standards and contains quality components and workmanship. It has been inspected
for proper operation of all of its functions and tested by qualified factory technicians
according to the long-established standards of our company.
Your instrument has a limited warranty against defective materials and/or workmanship
for one-year from the date of purchase provided that, in the opinion of the factory, the
instrument has not been tampered with or taken apart.
Should your instrument fail due to defective materials, and/or workmanship during this
one-year period, a no charge repair or replacement will be made to the original pur-
chaser. Please have your dated bill of sale, which must identify the instrument model
number and serial number and call the number listed below:
Repair Department
ATP – Amprobe, TIF, Promax
Miramar, FL
Phone: 954-499-5400
800-327-5060
Fax : 954-499-5454
Website: www.amprobe.com
Please obtain an RMA number before returning product for repair. Outside the U.S.A.
the local representative will assist you. Above limited warranty covers repair and
replacement of instrument only and no other obligation is stated or implied.
P/N: ATP VPC-20Manual printed in China
2xAA
Disconnect probes from
Voltag. Do not over-tighten
screws
Miramara, Florida 33025
Tel: 954-499-5400 Toll Free: 800-327-5060 Fax: 954-499-5418