Extron electronic MTP T 15HD A AAP - Manual (Page 16)

VersaTools ® MTP 15HD A Series • Installation VersaTools ® MTP 15HD A Series • Installation
VersaTools ® MTP 15HD A Series, cont’d
VersaTools ® MTP 15HD A Series • Specifications
Nominal level ............................... 1 V p-p for Y of component video and
S-video, and for composite video
0.7 V p-p for RGB and for R-Y and B-Y of
component video
0.3 V p-p for C of S-video
Minimum/maximum levels ...... 0.3 V to 1.45 V p-p
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ......... ±35 mV with input at 0 offset
Sync
Input type (transmitters) ............ RGBHV, RGBS, RGsB, RsGsBs
Output type (receivers) ............... RGBHV, RGBS, RGsB, RsGsBs
Standards ...................................... NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level (transmitter) ............. 3.5 V to 5.5 V p-p, unterminated
Output level (receivers) .............. 4.0 V to 5.0 V p-p, unterminated
Input impedance (transmitter) .. 573 ohms ±5%
Output impedance (receivers) ... 110 ohms
Max. input voltage (transmitter) 5.5 V p-p
Polarity
Transmitter ....................... Positive or negative
(follows input polarity)
Receivers ........................... Positive or negative (switch-selectable)
Audio
Number/signal type ................... 1 set of proprietary analog signals
Connectors .................................... 1 female RJ-45
Gain ............................................... Unbalanced output: 0 dB;
balanced output: +6 dB
Frequency response ..................... 20 Hz to 20 kHz, ±1 dB
THD + Noise ................................ 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal
level
S/N ................................................ >70 dB at maximum output (unweighted)
CMRR ............................................ >43 dB @ 20 Hz to 20 kHz
Audio input — transmitters
Number/signal type ................... 1 stereo, unbalanced
Connectors .................................... (1) 3.5 mm mini stereo jack
Impedance .................................... >10k ohms, unbalanced
Nominal level ............................... +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level ............................ +18 dBu, (unbalanced) at 1%THD+N
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
24
Audio output — receivers
Number/signal type ................... 2 mono, balanced/unbalanced
Connectors .................................... (1) 3.5 mm captive screw connector, 5 pole
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Nominal level ............................... +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level ............................ +18 dBu, unbalanced at 1% THD+N
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external;
to 12 VDC, 2 A, regulated
Power input requirements ......... 12 VDC, 0.5 A
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling .......................................... Convection, unvented
Rack mount ................................... Yes, with optional 1U rack shelf, part
#60-190-01 (RSU 129) or 60-604-02
(RSB 129); or with 1U, 6" deep rack shelf,
part #60-190-10 (RSU 126) or 60-604-11
(RSB 126); or with VersaTools
® 1U, 3" rack
shelf, part #60-190-20 (RSU 123) or
60-604-21
(RSB 123). Also furniture
mountable with optional Mini Under-
Desk Mounting Kit, part #70-212-01; or
projector mountable with optional
projector mounting kit, part #70-217-01.
Enclosure type .............................. Metal
Enclosure dimensions ................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight ............................. 0.4 lbs (0.2 kg)
Shipping weight ........................... 2 lbs (1 kg)
Vibration ....................................... ISTA 1A in carton
(International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
25 VersaTools ® MTP 15HD A Series • Specifications