Avago Technologies Cache Protection for RAID Controller Cards - Manual (Page 8)

LSI Corporation
- 8 -
LSICVM02 Kit Quick Installation Guide
May 2014 Installing the LSICVM02 Kit
Attaching the CVPM02 Module to the Clip
Attaching the CVPM02 Module to the Clip
Follow these steps to attach the CVPM02 module to the clip.
1. Ground yourself, and make sure that the system is grounded.
2. Remove the CVPM02 module from the package.
3. Place the CVPM02 module front-side-up on a flat, clean, static-free surface.
4. Press the CVPM02 module into the clip until the module clicks firmly into place, as shown in the following figure.
Figure 5 Attaching the CVPM02 Module to the Clip
A
CacheVault
Power Module
Clip
3_01275b-00