Avago Technologies MegaRAID SAS 9240-4i - Manual (Page 2)

LSI, the LSI & Design logo, CacheCade, Dimmer Switch, and MegaRAID are registered trademarks of LSI Corporation or its subsidiaries. All other brand and product names may be trademarks of their
respective companies.
LSI Corporation reserves the right to make changes to the product(s) or information disclosed herein at any time without notice. LSI Corporation does not assume any responsibility or liability arising out of
the application or use of any product or service described herein, except as expressly agreed to in writing by LSI Corporation; nor does the purchase, lease, or use of a product or service from LSI Corporation
convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual property rights of LSI Corporation or of third parties. LSI products are not intended for use in life-support
appliances, devices, or systems. Use of any LSI product in such applications without written consent of the appropriate LSI officer is prohibited.
Corporate Headquarters Email Website
San Jose, CA [email protected] www.lsi.com
800-372-2447
Document Number: 53419-00, Rev. F
Copyright © 2013 LSI Corporation
All Rights Reserved
StorCLI Reference Manual
January 2013
Revision History
NOTE This Revision History lists only the changes made to the current version of the document. For a complete list of all revisions made to the
previous versions of this document since its original publication, see Appendix
D , Revision Information .
Version and Date Description of Changes
Rev. F, January 2013  Added the pi and preventpiimport options to Table 4 .
 Added a note and a caution message at the start of Chapter 4 , Working with the Storage Command
Line Tool .
 Added a note in Section 4.3.9 , Drive Secure Erase Commands .
 Updated Section 4.4.2 , Delete Virtual Drives Commands , for using the force option.
 Added Section 4.4.7 , Virtual Drive Erase Commands .
 Updated Section 4.4.6 , Virtual Drive Initialization Commands , for using the force option.
 Added the storcli /cx/bbu show modes command in Section 4.9 , BBU Commands .
 Added Section 4.2.7 , Controller Cache Command .