Install photoconductor – Epson AcuLaser CX11N User Manual
Page 11
Advertising

Install Photoconductor
11
6. Push down the right lever to lock the toner cartridge.
Note:
The toner cartridge is installed securely when you cannot turn the lock lever any
further.
7. Close cover A and confirm the error message in the LCD panel. If another toner
cartridge needs to be installed, a message is displayed. Repeat steps 3 to 7 for each
of the remaining toner cartridges.
Install Photoconductor
Caution:
Make sure the CX11N is turned on and you have installed all the toner cartridges, as
described in the previous section.
1.
Install Photoconductor
appears on the LCD screen. Lift up the scanner, then
lift up cover B and raise the orange lever inside, on the right side.
Advertising