4 making internal scsi bus connections, Making internal scsi bus connections – Avago Technologies LSI21040 User Manual

Page 27

Advertising
background image

3.75 pc

10.25 pc

11.25 pc

38.25 pc

4.333 pc

48.583 pc

52.5 pc

34.5 pc

44.25 pc

Detailed Installation Procedure

2-9

2.2.4 Making Internal SCSI Bus Connections

This section provides step-by-step instructions about making internal
SCSI bus connections.

Step 1.

Plug one end of the 68-pin internal SCSI ribbon cable into
connector J4 or J2.

Figure 2.4

illustrates an example for this

step.

Important:

You must match pin 1 on this and all subsequent
connections.

Figure 2.4

Internal SCSI Ribbon Cable to Host Adapter
Connection

J2

J4

Advertising
See also other documents in the category Avago Technologies Hardware: