Electrolux EHS 36020 U - Manual (Page 34)

34 electrolux installing more than one frontline hob
Installing more than one
Frontline hob
Additional parts: cross bar(s), heat re-
sistant silicon, rubber block, shaving
blade.
Only use special heat-resistant sili-
con.
Cut-out section
Distance from the wall: at least 50
mm
Depth:490 mm
Width: The widths of all appliances to
be built-in are added together, minus 20
mm (see also “Overview of all appliance
widths”)
Example:
Installing more than one appliance
1. Work out the size of the cut-out sec-
tion and saw it out.
2. Remove Frontline strip from the ap-
pliances by hand (magnetic fastening).
3. Lay the appliances one at a time on
something soft (for example a blan-
ket) with the underside facing up-
wards.