Epson PhotoPC 3100Z - Manual (Page 145)

Maintenance and Troubleshooting A-8
◗ Make sure your camera is set to the correct broadcast
signal system (see page 14-10). Also see your television’s
manual for possible solutions.
◗ Check your playback settings to make sure the sound
setting is turned on (see Chapter 6).
You get an error message when you try to transfer your
pictures to the computer.
◗ Make sure the cable is connected correctly as described
in Chapter 9.
◗ Make sure your camera is turned on and the batteries
have enough power, or connect the AC adapter.
◗ If your camera is connected to a USB hub, try
connecting the camera directly to your computer.
You get a “The Camera Is Not Responding” or similar
error message when you’re using your PhotoPC 3100Z
software with the camera connected to your computer.
◗ Make sure the cable is connected correctly as described
in Chapter 9.
◗ Make sure your camera is not turned off and the
batteries have power, or connect the AC adapter.
◗ If your camera is connected to a USB hub, try
connecting the camera directly to your computer.
◗ From the error screen, click Connection and make sure
the connection is set to USB (Mounted Drive) . (See
page 10-6 for instructions.)
You are unable to drag and drop photos into a document.
◗ If your computer has less than 32MB RAM, you may
not be able to use drag and drop. Make sure you don’t
run too many applications at the same time. You may
need to add memory to your computer or use another
method of getting photos into your documents.
◗ Your application may not support this method of adding
pictures.
/HJHQGERRN 3DJH  0RQGD\ $SULO     30