Epson 503c - Manual (Page 13)

Welcome 7
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-video signal, you need an S-video cable. (One is
usually provided with your video device.)
■ To amplify your computer’s audio through the projector’s sound
system, you need a computer audio cable (male-to-male 3.5-mm
stereo miniplug cable). See your computer or electronics dealer to
obtain this cable.
■ Some older PowerBooks and Macintosh desktop models may
need the Macintosh adapter set shown on page 77 (available from
EPSON; see page 8). Older iMac systems may need a special
adapter to provide a VGA output port; see your computer dealer.
■ Some systems may need an additional cable to use the remote
control as a wireless mouse. If your Macintosh doesn’t have a USB
port, you’ll need a Macintosh mouse cable. See your projector
dealer to obtain the correct cable.