Mpman PC25HD User Manual

Page 9

Advertising

Battery

Battery installation

installation

The video camera uses four AAA alkaline batteries or original rechargeable lithium

battery. Before the battery is replaced, the power supply of the video camera shall be cut

off.

Open the battery cover and insert the battery due to the indication of positive and

negative poles in battery bin. Then close the battery cover.

SD/MMC

SD/MMC memory

memory

memory card

card

card installation

installation

Open the battery cover and insert the metal feet of SD/MMC memory card into the

groove of memory card according to the indication nearby the card groove. If the memory

card needs to be taken out, please press the SD/MMC memory card to take it out.

Note:

● Before replacing the memory card, the power supply of the video camera

shall be cut off.

● The card shall be inserted with the correct direction. Proper stress shall be

adopted when the card is inserted to prevent damage of the card or parts of

video camera. If the card can not be inserted, please check whether the

direction is correct.

● When the memory card is used for the first time or has been used in other

video camera, it shall be formatted at first.

Open

Open the

the

the screen

screen

Open the LED outward to let the LED display screen face toward you.

Open

Press the power supply for two seconds and then release, the video camera will be started.

Mode

Mode shift

shift

Under picture taking/recording mode, press the playback key to shift to playback mode

from picture taking/recording mode. Under playback mode, press the playback key to exit

playback mode.

Recording

Under recording mode, press the recording key to start recording and press the recording

key again to stop the recording.

Picture

Picture taking

taking

Under picture taking mode, press the camera key to take photos.

Advertising

Popular Brands

Popular manuals