PLANET ADE-3100 - Manual (Page 21)

3
received. This is done at a transfer rate of 10 Mega-bits per second.
5.4 PPP Configuration
The PPP Configuration page allows you to configure multiple PPP sessions for each
PVC. Multiple PPP sessions enables you to set up different connection settings and be
able to toggle/choose those settings for each PVC. The Router can support up to total of
16 PPP sessions, and each PVC can support up to 8 PPP sessions. The multiple PPP
sessions may be configured with any combination over 8 PVCs.
5.4.1 PPP Account Configuration
To begin PPP Session configuration, you must first go to the PPP Account
Configuration page (below) to set up an account. The link to this page can be found on
the PPP Configuration page. On the PPP Account Configuration page, you must
configure the Account ID, User Name and Password.
Account ID: It allows you to create an account ID to help distinguish different accounts,
up to 16 maximum. The Account ID can be up to 31 characters.
User Name: Enter the PPP user name (provided by the ISP). The User Name can be up
to 127 characters.
You cannot have two different user accounts with the same account name. If a
different User Name with an already existing Account ID is submitted, it will replace the
previous account with that Account ID. You can have the same User Name and
Password for two different accounts (Account ID).
Password: Enter the PPP password (provided by the ISP). The Password is not needed
to delete or modify the account. The Password can be up to 127 characters.