PLANET ADE-3100 - Manual (Page 22)

4
PPP Account Configuration Status table will be displayed at the bottom of this page to
show all the accounts. The status table does not display the password.
The Number of PPP Accounts: It displays the total number of PPP Accounts entered.
5.4.2 PPP Session Configuration
Once you set up a PPP Account, you can begin PPP Session configuration either by
clicking the Go back to PPP Configuration link on the PPP Account Configuration
page or clicking on PPP under the Configuration menu on the left hand side of the
browser.
Session Name: It allows you to enter a Session Name. This is user defined to help
distinguish different session for different PPP accounts and different PVCs.
PVC: It allows you to choose the specific PVC for the PPP session.
Service Name: The Service Name of the PPP session is required by some ISPs. If the
ISP does not provide the Service Name, please leave it blank.
Account to Use: You must select an account created in PPP Account Configuration
page here.
Disconnect Timeout: The Disconnect Timeout allows you to set the specific period of
time, in minutes, to disconnect from the ISP. The default is 0, which means never
disconnect from the ISP.
Range: 0-32767 Default: 0
PPP Idle Timer Config: It will link you to the PPP Disconnect Timer Configuration
page (see Section 5.4.3).