PLANET FPS-3300 - Manual (Page 22)

4.2.6 Advanced
In this option, you can make some advance settings to your FPS-3300.
Settings: You can Enable/Disable the Netware Bindery and NDS printing. In default, the printing methods are
disable.
Printer: Due to the printers are work with different data transfer speed. If you are work with a old printer (which
is not support DMA mode), you may set the printer speed to Normal or Slow. When the printer can not work
properly. , you can also try to disable the Bi-Directional support on each port.
4.3 Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the
steps as follows:
1. Click Upgrade button just like a picture , then you will see the upgrade screen.
22