PLANET FPS-3300 - Manual (Page 66)

6. In your editor, modify "BoxIPAddress" field from "0.0.0.0" to "192.72.214.100". Leave other options as
default and do not change their values. When done, save this new file and quit from your editor. Please
note, in this step you must specify an IP address which is valid on Segment B, such as
192.72.214.100 in this example, rather than 192.72.214.68.
7. Type, for example, "tftp 192.72.214.68 put config.txt" to save this new configuration back to print server.
8. Move the print server back to the Segment B.
9. Done.
66