PLANET NAS-7400 - Manual (Page 112)

PLANET NAS-7400 User Manual
109
i. In the Tree, click on the + beside the System icon.
ii. Click on the Reboot / Shutdown icon.
iii. Click on the Shutdown option.
iv. Click the OK button.
v. In the confirmation box, click the OK button.
6.8.6 Restarting the NAS-7400
The only time you need to shut down the NAS-7400 is to replace the disk
drive cooling fan or the power supply. See “Appendix B: Maintenance”
During and after the shutdown, none of your folders will be accessible from
your network PCs.
To shut down the NAS-7400:
i. In the Tree, click on the “+” button beside the “System” icon.
ii. Click on the “Reboot / Shutdown” icon.
iii. Click on the “Shutdown” option.
iv. If finished, please click the “OK” button.
Power Button
System
Status LED