PLANET UMG-2000 - Manual (Page 21)

21
2.1.8 The Hard Disk Installation
The SATA subsystem supports four hot-swappable hard drives. The SATA drives are
inserted to the SATA backplane that provides power and bus termination.
Note:
1. Please install at least one 80G HDD to the No.1 disk carrier before system configurations.
2. If with single HDD, please select RAID level to JBOD.
ƒ Locate the storage subassembly.
ƒ Press the disk carrier switch to unlock the carrier.
ƒ Unplug the disk carrier by pulling the carrier handler.
ƒ Mount the disk into the carrier and load the fixing screws.
ƒ Press the disk carrier switch to insert the carrier to the disk slot.
ƒ Close the disk carrier lock/switch to lock the carrier.