HP ScanJet Pro 2000 s1 - Manual (Page 13)

Control-panel view—2000 s1 models
Use the buttons on the control panel to start a scan, and to turn the scanner on and off.
1
2 3
1 Error LED A blinking or lit Error LED indicates that an error has occurred.
2 Power button and LED Press the Power button to turn on the scanner. Press and hold the
Power button for three seconds to turn off the scanner.
A lit Power LED indicates that the scanner is turned on.
3 Scan button Press the Scan button to initiate a scan.
ENWW Product views 5