ProSoft Technology MVI56E-MNETCR - Manual (Page 26)

Start Here MVI56E-MNETCR ♦ ControlLogix Platform
User Manual Modbus TCP/IP Multi Client Enhanced Communications Module for Remote Chassis
Page 26 of 159 ProSoft Technology, Inc.
June 14, 2011
1.11 Creating a New RSLogix 5000 Project
1 Open the F ILE menu, and then choose N EW .
2 Select your ControlLogix controller model.
3 Select R
EVISION 16.
4 Enter a name for your controller, such as My_Controller.
5 Select your ControlLogix chassis type.
6 Select S
LOT 0 for the controller.
Note: If you are installing the MVI56E-MNETCR module in a remote rack, follow these next few
steps. If you are installing the module in a local rack, follow the steps in Create the Module - Local
Rack (page 31).