ProSoft Technology PLX31-EIP-SIE - Manual (Page 55)

PLX3x Series EIP Protocol
Ethernet and Serial Gateways User Manual
ProSoft Technology, Inc. Page 55 of 218
September 17, 2014
MSG Instruction Type - PCCC
Database Address File size 100 Database Address File size 100
0 N10:0 0 N10:0
999 N19:99 999 N19:99
1000 N20:0 1000 N20:0
1999 N29:99 1999 N29:99
2000 N30:0 2000 N30:0
EtherNet/IP Explicit Messaging Server Command Support
The following commands are supported in the PLX3x gateway.
Basic Command Set Functions
Command Function Definition Supported in Server
0x00 N/A Protected Write X
0x01 N/A Unprotected Read X
0x02 N/A Protected Bit Write X
0x05 N/A Unprotected Bit Write X
0x08 N/A Unprotected Write X
PLC-5 Command Set Functions
Command Function Definition Supported in Server
0x0F 0x00 Word Range Write (Binary Address) X
0x0F 0x01 Word Range Read (Binary Address) X
0x0F Typed Range Read (Binary Address) X
0x0F Typed Range Write (Binary Address) X
0x0F 0x26 Read-Modify-Write (Binary Address)
0x0F 0x00 Word Range Write (ASCII Address) X
0x0F 0x01 Word Range Read (ASCII Address) X
0x0F 0x26 Read-Modify-Write (ASCII Address)
SLC-500 Command Set Functions
Command Function Definition Supported in Server
0x0F 0xA1 Protected Typed Logical Read With Two
Address Fields X
0x0F 0xA2 Protected Typed Logical Read With Three
Address Fields X
0x0F 0xA9 Protected Typed Logical Write With Two
Address Fields X
0x0F 0xAA Protected Typed Logical Write With Three
Address Fields X
0x0F 0xAB Protected Typed Logical Write With Mask (Three Address Fields)