ProSoft Technology AN-X2-GENI - Manual (Page 47)

AN-X2-GENI (AN-X-GENI/B) Page 41
Autoconfiguration
If you are autoconfiguring the Genius network, connect the Genius network to the
AN-X2-GENI.
To configure just the I/O, check Auto-configure Genius network.
To configure the Genius network and also generate a default ControlLogix configuration
on the AN-X, check Auto-configure Genius network and ControlLogix configuration
Click the Auto-configure Network button.
Manual Configuration
Manual configuration does not require that the network be online.
Create a configuration file. Refer to page 21 for details on the file format.
Browse or type the file name.
Click the Send File to AN-X button to send the values to AN-X.
When you download a Genius network configuration, AN-X reloads the ControlLogix
configuration and regenerates ControlLogix tags.
Configure ControlLogix Support
AN-X exchanges scheduled data with a ControlLogix processor over Ethernet. Refer to
section Exchanging Scheduled Data with a ControlLogix on page 21 for information on
configuring scheduled data exchange.