Eiki EIP-1600T - Manual (Page 16)

12
Numbers in Z refer to the main pages in this owner’s manual where the topic is
explained.
Rear View
Part Names and Functions (Continued)
Remote control
sensor (rear)
Rear adjustment
foot
Kensington
Security Standard
connector
AC socket
Connect the
supplied Power cord.
Intake vent
Exhaust vent
51
28
31
51
15
13
6 5 4 1 2 3 7
Terminals
Page
25
Terminal Description
23
1
2
3
INPUT 3 terminal
Connecting video equipment with S-video output terminal (VCR, DVD
player, etc.).
4
24
INPUT 4 terminal
Connecting video equipment without S-video output terminal.
24
5
INPUT 5 terminal
■ Connecting the computer.
■ Connecting video equipment with component output terminal
(DVD player, DTV decoder, DVD recorder with hard disc, etc.).
TRIGGER terminal
When the projector is turned on, a control signal (DC 12V) outputs from this
terminal. If an electric screen or other compatible device is connected, it
can be turned on when the projector is turned on.
RS-232C terminal
Connecting the computer to control the projector.
6 27
7
INPUT 6 terminal
Connecting video equipment with HDMI output terminal.
—
26
INPUT 1, 2 terminal
Connecting video equipment with component output terminal (DVD
player, DTV decoder, DVD recorder with hard disc, etc.).