Yamaha PSR-S770 - Manual (Page 23)

PSR-S970/S770 Owner’s Manual 23
B
asi
c Oper
at
ion
s
With the convenient Direct Access function, you can instantly call up the desired display — with just a single
additional button press. Refer to the “Direct Access Chart” on page 106 for a list of the displays that can be called
up with the Direct Access function.
1
Press the [DIRECT ACCESS] button.
A message appears in the display prompting you to press the appropriate button.
2
Press the button (or move the knob, wheel or connected pedal)
corresponding to the desired setting display to instantly call up
that display.
For example, pressing the [GUIDE] button calls up the display in which the
Guide mode can be set.
A message (information or confirmation dialog) sometimes appears on the screen to facilitate operation. When the
message appears, simply press the appropriate button.
Calling Up the Desired Display Instantly — Direct Access
Messages Shown in the Display
12psrs970_en_om.book Page 23 Friday, June 26, 2015 3:33 PM