Yamaha Reface YC - Manual (Page 34)

28 reface CS/DX/CP/YC Owner’s Manual
Functions of Front Panel Components
y-1. [TREMOLO/WAH] switch
For selecting whether to add tremolo (up
position), add wah (down position), or pass
the sound through unaffected (middle posi-
tion).
The lamp (y-4) will light up when either
tremolo or wah is selected and go out when
the sound passes through unaffected.
y-2. [DEPTH] knob
Increases the effect on the sound when turned
clockwise.
 With tremolo
When [TYPE] is set to Rdl, Rdll, or
CP:
Adjusts the degree to which the sound is
modulated left and right.
When [TYPE] is set to Wr, Clv, or
Toy:
Adjusts the degree to which the volume is
modulated.
 With wah
Adjusts the sensitivity of the wah filter.
y-3. [RATE] knob
Increases the effect on the sound when turned
clockwise.
 With tremolo
Adjusts the speed of modulation.
 With wah
Adjusts the resonance offset value. This
changes the character of the modulated
sound.
uCHORUS/PHASER
This section lets you add a chorus or phaser
effect.
 CHORUS
Adds richness and depth, making it sound
like multiple tone generators are simultane-
ously outputting the same voice. This makes
the voice sound much wider.
 PHASER
Creates a highly distinctive sweeping, swell-
ing tone by shifting the phase of the sound
and mixing it back into the original signal.
u-1. [CHORUS/PHASER] switch
For selecting whether to add chorus (up posi-
tion), add the phaser effect (down position),
or pass the sound through unaffected (middle
position). The lamp (u-4) will light up when
either chorus or the phaser is selected and go
out when the sound passes through unaf-
fected.
Light tremolo Intense tremolo
Le
v
e
l
Light wah Intense wah
Le
v
e
l
Frequency Frequency
Slow tremolo Fast tremolo
Le
v
e
l
Character of the
sound unchanged
Character of the sound
significantly changed
Frequency Frequency
Resonance