Pioneer X-CM56 - Manual (Page 8)

Part names and functions 02
8
En
Front panel
1 Í STANDBY/ON
Switches the receiver between standby and on (page 13).
2 NFC area
Touching the NFC-equipped smartphone to this area, this
unit can establish Bluetooth connection simply (See
Pairing and connection using NFC on page 28 ).
3 INPUT
Selects the input source.
4 Remote sensor
Receives the signals from the remote control.
5 TIMER indicator
Lights when the receiver is power off with timer setting.
6 Main display
7 Playback control buttons
Selects the desired track or file to be played back. Use to
stop the playback. Stops playback or resumes playback from
the pause point.
8 Disc tray open/close button
Use to open or close the disc tray (page 16).
9 Volume control
Use to set the listening volume (page 13).
10 Headphone socket
Use to connect headphones. When the headphones are
connected, there is no sound output from the speakers.
11 Disc tray
Place the disc, label side up (page 16).
12 USB terminal
Use to connect your USB mass storage device as an audio
source (page 19).
Attaching the Non-skid pads
Apply the accessory non-skid pads to the bottom surfaces of
this unit.
PHONES
STANDBY/ON INPUT
1 3 3 5 8 9 7 2 6 4
10 11 12
The bottom surface
of this unit
SN29402593_X-CM56&56D_En.book 8 ページ ２０１６年５月２７日 金曜日 午後３時４７分