Epson STYLUS R2880 User Manual
Page 22
22
Printing From Start to Finish
7. Choose the paper
Source
in which you loaded your paper:
■
Sheet
: for sheets of paper loaded in the sheet feeder.
■
Roll Paper
: for photos or panoramics up to 27 inches (68.6 cm) long. If
desired, click
Print page frame
to print a cutting guideline around each
photo.
■
Roll Paper - Banner:
for photos or banners over 27 inches (68.6 cm)
long. If desired, click
Save Roll Paper
to feed small amounts of roll
paper between each banner.
■
Manual - Roll
: for a sheet of compatible paper loaded in the single sheet
guide (see page 8 for loading instructions).
■
Manual - Front:
for thick media loaded in the front manual feed slot (see
■
CD/DVD
: for a disc loaded in the CD/DVD tray guide (see page 31 for
printing instructions).
8. Select the paper
Size
setting for the paper you loaded.
If you loaded roll paper or canvas media, create a custom paper size. Select
User Defined
in the Size menu, then click the
User Defined
button. Type a
name for your custom size. For the Paper Width, enter
8.3
for A4- or
12.95
for Super B-size rolls. For the Paper Height enter the desired length up to
44 inches. Click
Save
, click
OK
, then select your custom paper size in the
Size
menu.
Note:
For roll paper, make sure the maximum width of your photo is 8.3 or 13 inches to fit
in the width of your roll paper (set the margins to 0 in your application software).
9. If you’re printing borderless photos, select
Borderless
, if available. To adjust
the borderless expansion setting click
Expansion
.
10. To reduce or enlarge your printout or print double-sided, click the
Page
Layout
tab and select settings as necessary. (Click
Help
or see your on-screen
Reference Guide for details.)
Note:
For color management instructions, see http://www.epson.com/SPR2880Profiles.
For more information about print settings, click Help or see your on-screen
Reference Guide.
11. Click
OK
to save your settings.
12. Click
OK
or
to start printing.
spr2880_ug.book Page 22 Monday, April 6, 2009 1:10 PM