Sharp MX-6070N - Manual (Page 54)

54
Image Send Problems
AN ADDRESS (A ONE-TOUCH INDIVIDUAL KEY
OR GROUP KEY) CANNOT BE STORED
Check Solution
Has the maximum number of keys
been stored? ■ Adjust the number of stored keys.
Delete addresses (one-touch keys and group keys) that are not being used.
AN ADDRESS (A ONE-TOUCH INDIVIDUAL KEY OR
GROUP KEY) CANNOT BE EDITED OR DELETED
Check Solution
Is the key being used in a reserved
transmission or a transmission in
progress? ■ Wait until the transmission is finished or cancel the reserved transmission and
then edit or delete the key.
Has your administrator enabled a
function that prevents
editing/deleting? ■ Check with your administrator.
If your administrator has enabled settings such as [Default Address Setting] and
[Inbound Routing Settings], keys cannot be edited or removed.
I WANT TO CHANGE THE FORMAT OR
COMPRESSION OF A SCANNED IMAGE
Check Solution
Use the [Format] key. ■ You can use the [Format] key to set the format and compression percentage of a
file to be saved or sent. In normal mode, you can create a file of a number of
original pages
[Specified Pages per File] can be used.
I DON'T KNOW HOW TO CHECK AN ADDRESS
WHEN SENDING AN IMAGE
Check Solution
Tap the [Address Review] key. ■ Tap the [Address Review] key to view a list of the addresses.
?
!
?
!
?
!
?
!