Sharp MX-6070N - Manual (Page 9)

9
General Problems
PUNCHING DOES NOT TAKE
PLACE
Does a message appear instructing you to check the punch module? 21
Is a different size of paper mixed in? 21
Is a paper size that cannot be punched included in the print job? 21
Is the tray selected in the printer driver set to a paper type that cannot
be punched?
21
THE STAPLING POSITION OR
PUNCH POSITION IS NOT
CORRECT
Is the stapling position setting correctly? 21
Are the punching positions setting correctly? 21
FOLDING DOES NOT TAKE PLACE Did the administrator enable the [Disabling of Duplex] setting? 21
Are you using a paper type that has a specific front and reverse side? 21
PREVIEW IMAGES OR THUMBNAIL
IMAGES DO NOT APPEAR
Are there a number of jobs waiting to be executed? 22
THE TOUCH PANEL DISPLAY IS
DIFFICULT TO VIEW
Is the brightness properly adjusted? 22
YOU WERE LOGGED OUT
WITHOUT LOGGING OUT
YOURSELF
Did Auto Clear activate? 22
I DON'T KNOW WHERE THE IP
ADDRESS SETTING IS
The IP address is set in the Network Settings of Setting mode. 22
I DON'T KNOW HOW TO CHANGE
THE BACKGROUND COLOR OF
THE HOME SCREEN
You can change the background color in "MFP Display Pattern Setting". 23
I DON'T KNOW HOW TO ADD A
SHORTCUT TO OR DELETE A
SHORTCUT FROM THE HOME
SCREEN
You can change a shortcut in "Edit Home". 23
I DON'T KNOW HOW TO RESTORE
THE LARGE TEXT SETTING TO ITS
ORGINAL STATE
Is large text mode enabled in the home screen? 23
I DON'T KNOW HOW TO ADJUST
THE TIME THE MACHINE ENTERS
ENERGY SAVE MODE
Set the time the machine enters energy save mode in the Energy Save
settings of setting mode.
24
I FORGOT THE ADMINISTRATOR
PASSWORD
Was the administrator password changed from the factory default
setting?
24
I DON'T KNOW WHOM TO
CONTACT FOR MAINTENANCE
AND SERVICE
Please check the customer support information. 24
Problem Check Page ?