Supplied components, English, Installing the batteries – Sharp PN-60TA3 User Manual

Page 7: Connecting the touch pen adapter, Inserting the battery

Advertising
background image

ENGLISH

5

E

Supplied Components

If any component should be missing, please contact your dealer.

Liquid Crystal Display Monitor: 1

Remote control unit: 1

Power cord

Remote control unit battery

(R-6 (“AA” size)): 2

Cable clamp: 3


Cable clamp (insertion type): 2

CD-ROM (Utility Disk): 1

CD-ROM (Touch Display Link): 1

Touch Display Link License: 1

Setup Manual (this manual): 1

Touch pen (PN-ZL02): 1

Touch pen adapter (PN-ZL01): 1

Pen tip (for touch pen): 2

Touch pen battery

(LR-03 (“AAA” size)): 1

Tray: 1

USB cable: 1

Eraser: 1

Camera mount: 1

Camera screw (inch thread): 1

Touch pen adapter screw (Step screw, M3): 1

Tray mounting screws (M3) : 5

Cover SHARP logo: 1

Place this sticker onto the SHARP logo to cover

the logo.

* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

* For environmental protection!

Do not dispose of batteries in household waste. Follow the disposal instructions for your area.

Preparing the Remote Control Unit and the Touch Pen

Installing the batteries

1. Press the cover gently and slide it in the direction of the

arrow.

2. See the instructions in the compartment and put in the

supplied batteries (R-6 (“AA” size) x 2) with their plus (+)

and minus (-) sides oriented correctly.

3. Close the cover.

Connecting the touch pen adapter

To use the touch pen, insert the touch pen adapter into the

touch pen adapter port on the monitor.

Touch pen

adaptor

Touch pen

adapter screw

(antitheft)

Touch pen

adapter port

Inserting the battery

1. Remove the battery cap.

2. Open the cover and insert the supplied battery (LR-03

(“AAA” size)) into the touch pen.

Check the plus (+) and minus (-) markings on the inside

of the touch pen and insert the battery in the correct

orientation.

Battery cap

1

2

3. Replace the cover and battery cap.

TIPS

• Calibration must be performed prior to initial use of the

touch pen.

• To use an optional touch pen with the monitor, the touch

pen must be registered in the touch pen adapter. (pairing)

For details, see the operation manual.

Advertising
This manual is related to the following products: