Sharp PN-U423 User Manual

Page 10

Advertising
background image

8

E

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some materials

such as plaster / thin plastic board / wood before starting installation.

• This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.

Install by the most suitable method for the material and the structure.

• To attach a VESA-compliant mounting bracket, use M6 screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the

thickness of the mounting bracket.

• Do not use an impact driver.
• When moving the monitor, hold the parts marked by

below. Do not hold the LCD panel. This may cause product

damage, failure, or injury.

• After mounting, please carefully ensure the monitor is secure, and not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.

Model

PN-U553

PN-U473

PN-U423

Power requirement

AC 100 - 240 V, 1.5 A,

50/60 Hz

AC 100 - 240 V, 1.5 A,

50/60 Hz

AC 100 - 240 V, 1.3 A,

50/60 Hz

Operating temperature *1

41°F to 104°F

(5°C to 40°C) *2

32°F to 104°F (0°C to 40°C)

Operating humidity

20% to 80% (no condensation)

Power consumption

130 W

130 W

115 W

Dimensions (excluding protrusions)

inch (mm)

Approx. 49-3/16 (W) x

2-1/4 (D) x 28-3/8 (H)

(1250 x 57 x 721)

Approx. 42-5/8 (W) x

2-3/16 (D) x 24-11/16 (H)

(1083 x 55 x 627)

Approx. 38-5/16 (W) x

2-1/4 (D) x 22-1/4 (H)

(973 x 57 x 565)

Weight

lbs. (kg)

Approx. 55.2 (25)

Approx. 41.9 (19)

Approx. 35.3 (16)

*1 Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such

cases, please check the temperature condition specified by the optional equipments.

*2 Use of the monitors in temperatures below 50°F (10°C) might result in inconsistent image quality that, depending on the viewing angle, might

be noticeable along the edges of the screen.

Please note that this is not a malfunction and does not affect monitor operation.

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement

without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from

these values in individual units.

Specifications

Mounting Precautions (For SHARP dealers and service engineers)

Advertising
This manual is related to the following products: