Connections – Sharp PN-R603 User Manual

Page 8

Advertising
background image

6

E

Connections

Caution

• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting

cables. Also, read the manual of the equipment to be connected.

• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables

connected to the input and output terminals may cause malfunctions and the other problems.

1

2

3

4

5

6 7

8

9

10

11

12

13

14

For power outlet

Power cord

(Supplied)

TIPS

• Set the audio input terminal used for each input mode in AUDIO SELECT on the SETUP menu. The factory settings are

shown below.

Input mode

Audio input terminal (Factory setting)

DVI-I

Audio1 input terminal

DisplayPort

DisplayPort input terminal

HDMI1[PC], HDMI1[AV],

HDMI2[PC], HDMI2[AV]

PC/AV HDMI input terminal

D-SUB[RGB],

D-SUB[COMPONENT],

D-SUB[VIDEO]

Audio2 input terminal

• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks

of HDMI Licensing LLC in the United States and other countries.

• DisplayPort is a registered trademark of Video Electronics Standards Association.

1. AC input terminal

2. DisplayPort input terminal

3. DisplayPort output terminal

4. DVI-I input terminal

5. DVI-D output terminal

6. Audio1 input terminal

7. Audio2 input terminal

8. LAN terminal

9. RS-232C output terminal

10. RS-232C input terminal

11. Audio output terminal

12. PC/AV D-sub input terminal

13. PC/AV HDMI1 input terminal

14. PC/AV HDMI2 input terminal

Advertising
This manual is related to the following products: