Emerson Radio NR51 - Manual (Page 12)

1 1
PROGRAMMED PLAYBACK
This feature allows you to program up to 20 tracks on a disc for playback in any
desired order.
Note: You cannot program tracks while a disc is playing. If the disc is playing
press the STOP button first before beginning the programming steps below:
1.) Press the PROGRAM button to enter the Program Mode.
The Program number briefly shows ‘0 1’, then ‘0 0’ and the
Program indicator flash.
2.) Press the F.SKIP or B.SKIP buttons to select the first track
number you wish to enter in the program memory.
Example: Track Number ‘0 8’.
3.) When the desired track number appears on the display, press
the PROGRAM button again to enter that track in memory.
The Program number briefly shows ‘0 2’, then ‘0 0’ flashes.
4.) Repeat Steps 2-3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
Note: You may program the same track number to play multiple times in
the program sequence if desired.
5.) Press the PLAY/PAUSE button to begin Programmed
Playback. The Program indicator stops flashing and remains
‘on’. Playback will begin with the first track you programmed
and will continue until the last programmed track has played.
Program
Program
Program
Program
NR51_011604.p65 16/1/2004, 10:46 11