Operating instructions, Listening to the radio, Antenna information – Emerson Radio NR51 User Manual

Page 9

Advertising
background image

8

OPERATING INSTRUCTIONS

LISTENING TO THE RADIO

1.) To turn the system ‘on’, rotate the ON/OFF-VOLUME control clockwise until a

‘click’ is heard, and set the Volume to a low level. The Tuning Dial comes ‘on’.

2.) Set the Function selector (AM/FM/CD) to the desired band, AM or FM .

3.) Rotate the TUNING control to tune to the desired radio station. If you tune to an

FM Stereo station, the FM ST. indicator will come ‘on’.

4.) Adjust the ON/OFF-VOLUME control as desired.

5.) When you are finished listening turn the ON/OFF-VOLUME control counter

clockwise until a ‘click’ is heard.

Antenna Information

The AM antenna is inside the cabinet. If AM reception is unsatisfactory try

repositioning the cabinet slightly until the internal antenna is picking up the strongest

signal.

The FM wire antenna is located on the back cabinet. If necessary adjust the position

and direction of this antenna until you find the position that provides the best

reception.

AM

CD

TUNING

OFF

VOLUME

FM

NR51_011604.p65

16/1/2004, 10:46

8

Advertising